DYNA-TITE CABLES
CABLE
Wire Rope
Aviation grade galvanized wire rope supplied by Duro Dyne is manufactured to exacting standards and statistically tested to verify stated breaking strengths. Duro Dyne WC2-CL6, WC3-CL12 and WC4-CL18 wire ropes utilize standard 7×7 construction. Duro Dyne WC8-CL25 and WC6-CL23 wire ropes have a 7×19 construction. Only use wire rope supplied by Duro Dyne with Dyna-Tite cable locks to ensure maximum safety and integrity of the installation.
| Size | Tolerance | Construction | For Use With | Safe Working Load *+ |
| WC8-CL25 | +5% /-0% | 7×19 | CL25-WC8 | 50-1,100 lbs (25-500 Kg) |
| WC6-CL23 | +.018/-.009 inch | 7×19 | CL23-WC6 | 50-640 lbs (25-291 Kg) |
| WC4-CL18 | +.014 /-.007 inch | 7×7 | CL18-WC4 | 25-250 lbs (12-114 Kg) |
| WC3-CL12 | +.012 /-.006 inch | 7×7 | CL12-WC3 | 25-150 lbs (12-68 Kg) |
| WC2-CL6 | +.010 /-.005 inch | 7×7 | CL6-WC2 | 10-75 lbs (5-34 Kg) |
* Safe Working Loads are based on a 5:1 Safety Factor
+ Hanging at angles will reduce the Safe Working Loads.
Please see our Effects of Hanging at Angles table here
Looped Cable
The Looped Cable Assembly enhances the Dyna-Tite suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the jobsite. The remaining wire rope “drop” is passed through a channel in the Dyna-Tite Cable Lock. Then, the wire rope is either wrapped around the ductwork or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the ductwork in place. To ensure maximum safety, use only looped wire rope supplied by Duro Dyne with all cable lock applications.
| Item No. | Code | Description | Loop Size | Qty/Bx |
| 30228 | LC05WC3 | 5 ft WC3-CL12 Cable | 1-1/2″ | 100 |
| 30229 | LC10WC3 | 10 ft WC3-CL12 Cable | 1-1/2″ | 100 |
| 30230 | LC15WC3 | 15 ft WC3-CL12 Cable | 1-1/2″ | 100 |
| 30232 | LC25WC3 | 25 ft WC3-CL12 Cable | 1-1/2″ | 50 |
| 30233 | LC05WC4 | 5 ft WC4-CL18 Cable | 2″ | 100 |
| 30234 | LC10WC4 | 10 ft WC4-CL18 Cable | 2″ | 100 |
| 30235 | LC15WC4 | 15 ft WC4-CL18 Cable | 2″ | 100 |
| 30237 | LC25WC4 | 25 ft WC4-CL18 Cable | 2″ | 50 |
End Fixings Installation Instructions
Looped Cable Assembly Submittal
Hanging at angles will reduce the Safe Working Loads.
Please see our Effects of Hanging at Angles table here
Eyelets
Duro Dyne Dyna-Tite eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. Dyna-Tite Eyelet assemblies are available for installation with either a 1/4 in. or 3/8 in. fastener. They are available in 45°and 90° variations.
Eyelets Literature Sheet
End Fixings Installation Instructions
90° Eyelet Submittal
45° Eyelet Submittal
90° and 45° Eyelet with Cable Lock Kits
Duro Dyne Dyna-Tite eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. Dyna-Tite Eyelet assemblies are available for installation with either a 1/4 in. or 3/8 in. fastener. They are available in 45°and 90° variations.
The eyelet kits includes a 90° 1/4″ or 3/8″ or a 45° 1/4″ or 3/8″ eyelet with a cable lock that corresponds to the eyelet’s cable size. Available eyelet cable lengths: 5′, 10′, 15′ and 25′.
Eyelet with Cable lock Kits Literature Sheet DDC
Snap Hooks
Snap hook cables offer easy attachment points and are ideal for applications that require constant inspection or maintenance that may require you to remove the load from the ceiling.
Snap Hook Literature Sheet
Snap Hook Submittal
Dyna-Stud® Swaged Threaded Stud
Dyna-Stud® used with Dyna-Tite cable locks can greatly decrease labor time for constructing suspension systems from a concrete or steel structure.
The Swaged Dyna-Stud is a heavy duty stud with one end of an aircraft rated cable attached. Dyna-Stud is used to suspend duct work from a concrete structure. The stud is threaded into the expansion anchor without putting stress on the cable. This makes for a much safer and tighter connection. The raw end of the cable, in conjunction with the cable lock, is used to attach the object being supported.
- Available with:
1/4 Threaded Bolt and WC3-CL12 Wire Rope
3/8 Threaded Bolt and WC4-CL18 Wire Rope or
3/8 Threaded Bolt and WC4-CL18 Wire Rope with Zip-Clip Lock - Available in 5, 10, 15 and 25 foot lengths
- Drop-ins sold separately
- Safe Working Loads are based on a 5:1 Safety Factor
Dyna-Stud Swaged Literature Sheet
Dyna-Stud Swaged Submittal
Dyna-Stud Swaged with Zip-Clip Submittal
End Fixings Installation Instructions
Cable Cutter
When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.
- Safety catch
- Hand held cutting tool for WC2-CL6, WC3-CL12, WC4-CL18 and WC6-CL23 wire rope
- Spring loaded for ease of use
- 5” Long handles for high leverage
- Hardened steel blades for durability
- Vinyl coated handles for comfortable, non-slip grip
| Item No. | Code | Description | Qty per Pkg |
| 818263 | DTWRCL | Cable Cutter for WC2,WC3,WC4 & WC6 Wire Rope | 1 |
WC8-CL25 Cable Cutter
When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.
- Safety catch
- WC8-CL25 wire rope cutting capacity
- Hardened steel blades for durability
- Vinyl coated handles for comfortable, non-slip grip
| Item No. | Code | Description | Qty per Pkg |
| 30344 | DTRWC14 | Cable Cutter for WC8-CL25 Wire Rope | 1 |
Custom Cable Counter
The CCC1 makes preparing for your duct hanging project a lot simpler. Take an empty five gallon bucket, put a spool of wire rope in the bottom, put in some boxes of Dyna-Tite cable locks and a cable cutter. Place the CCC1 on top of the bucket and you are ready for the job site. At the job site remove the cable lock boxes and the wire cutter, thread the wire rope through the CCC1 measuring device and you are ready to hang ductwork. Just pull the wire rope to the length needed, cut it and reset the counter.
- Counter displays from 0 feet 0 inches to 9999 feet and 11 inches
- Push button reset
- Designed for use with Duro Dyne wire rope
- Fits most 5 gallon buckets
- Lightweight
| Item No. | Code | Description | Qty per Pkg |
| 30390 | CCC1 | Custom Cable Counter | 1 |