KLENK® SPECIALTY ITEMS
Klenk® K-6 Crimper
The model K-6 is a round duct, sheet metal pipe and downspout crimper. This tool reduces the diameter of the end of the pipe so it can be inserted into another pipe of similar size. The K-6 has 5 blades and makes perfect uniform crimps on sheet metal up to 20-gauge. It is recommended for light or heavy piping – furnace, smoke, wall stacks, air ducts, water heater vent pipes and downspouts. The K-6 crimps up to 1-5/8″ for good overlap connection. Heat treated blades for long wear, hardened pivot bolt for durability, offset handles with orange vinyl grips for comfort. For natural in-draw on metal, always start with the three blades on top.
9-3/4″ overall length.
| Item No. |
Code |
Description |
Klenk No. |
|
| 820110 |
K-6 |
5 Blade Crimper |
MA71260 |
 |
| 820331 |
K-6 Spring |
Replacement Spring for K-6 Crimper |
MA76050 |
|
Klenk® KDS-3000 Duct Slicer
STOP breaking your screwdriver! The KDS-3000 slices safely through metal duct and works great for take-offs. The KDS-3000 can also be used as a pry bar or regular screwdriver.
- The beveled edge notch on the tip allows easier and more accurate piercing of sheet metal.
- Improved heat-treated steel shaft provides durability and longer-lasting edge on tip.
- Ergonomic handle is contoured with a rubberized grip on the handle’s exterior giving users a more comfortable and secure grip.
- The shock absorbing handle. Re-engineered internal structure and steel end cap strengthen handle and absorbs shock when the tool is struck, decreasing hand fatigue.
- 12″ overall length.
| Item No. |
Code |
Description |
Klenk No. |
|
| 820117 |
KDS-3000 |
12″ long Duct Slicer 3000 |
MA73010 |
 |
Klenk® KDC-5 Pipe Cutter / Double Cut
- Cuts round, oval, blackpipe and downspout.
- Pushing center blade point through pipe starts the cut. This three-blade tool takes out a 1/8″ track leaving both ends clean and straight.
- Maximum opening of jaws provides better bite – minimum opening of spring-back handles provides easier cutting.
- Made from durable, hardened steel and hardened pivot bolt provides long wear.
- Non-slip handle grips are comfortable and secure.
- 10-1/2″ overall length, 1-1/4″ cut.
| Item No. |
Code |
Description |
Klenk No. |
|
| 820100 |
KDC-5 |
10-1/2″ long Pipe Cutter / Double Cut |
MA71500 |
 |
Klenk®Tongs
| Item No. |
Code |
Description |
Klenk No. |
|
| 820103 |
KHT |
3″ Tong |
DA73000 |
 |
| 820104 |
KHT-3G |
3″ Tong with Grips |
MA73500 |
 |
